Sargent and Greenleaf 6120 Operations Instructions download pdf (Page 23)

Setting the Access Mode:

Press 3 2

( _ _ _ _ _ _ )



(

☞

)



(

☞

)



☞

= 0 for Single User access

☞

= 1 for Dual User access

☞

= 2 for Supervisor/Subordinate access

Notes:

time delay override does not work in S/S mode

a supervisor code must be set before changing to S/S mode

User Changes His Own Code:

Press 3 3

( _ _ _ _ _ _ )



( _ _ _ _ _ _ )



( _ _ _ _ _ _ )



Note: users cannot delete their own codes

current user

code

new user code new user code

master code

Notes:

• The Supervisor code cannot set, change, or delete any codes in Dual Control mode.

• Time Delay Override (TDO) is not available in Supervisor/Subordinate mode.

Recovering a 6123 with Unknown Programming:

You will need the Management Reset Code (MRC) for the lock.

1. Make sure there are good batteries in the keypad.

2. The lock cable must be plugged into the keypad.

3. DO NOT PRESS ANY BUTTONS FOR AT LEAST 15 MINUTES!

4. Press

( _ _ _ _ _ _ _ )

(lock beeps once  for each time the MRC has been used)

5. Press 3 2

1 2 3 4 5 6





The lock should now be in Single User Mode, and the Master Code is 1 2 3 4 5 6 .

Repeat steps 1 through 5 if necessary.

To make sure a Time Delay Override Code is not retained in the lock:

Press 7 4

1 2 3 4 5 6





MRC

6123 and Z

Quick RefeRence

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 39 40

Comments to this Manuals

No comments

Sargent and Greenleaf 6120 Operations Instructions Page 23

Comments to this Manuals

Related products and manuals for Numeric keypads Sargent and Greenleaf 6120